Sun Welding Vault Door | UL RSC | CA DOJ Approved | 30-120 Minutes Fire Rated | Out Swing / In Swing

The Sun Welding Vault Door is a remarkable piece of engineering designed to safeguard your most valuable possessions. Crafted with precision and strength, this vault door offers unparalleled security and peace of mind. Its robust construction, combined with advanced locking mechanisms, ensures that unauthorized access is nearly impossible. The Sun Welding Vault Door is not only a symbol of protection but also a testament to the dedication and expertise of the craftsmen who created it. Trustworthy and reliable, this vault door stands as a steadfast guardian of your treasures. Handcrafted vault door made from solid steel. Over four standard sizes available, custom options.

CA Residents: See Prop 65 Warning

Features

• Solid Steel Plate ¹⁄4" plate door on the Vault Door
• Handcrafted
• Offers heavy duty exterior hinge set with a full 180° swing door
• Choice of Interior Style
• Option of a UL listed group 2 combination mechanical lock or electronic lock
• Bolt Works & Linkage
• Lifetime Warranty
• USA Made

Fire Rating

The fire test was performed with a safe being placed in an oven that was 1200º. At 'x' minutes the internal temperature of the safe reached 350°. The overall burn time of a safe in a fire depends on many different factors such as the temperature of the fire and the length of time the fire burns around the safe. The safe door also includes a smoke seal around the door to prevent smoke from entering the safe.

General Mounting Information

Rough Opening: By selecting one of our four standard vault door rough opening sizes, listed above, a ¹⁄2" clearance on the height and ¹⁄2" on each side (1.0" total) on the width is standard. If you order a custom sized vault door we automatically reduce the vault door frame to meet your rough opening dimension. This allows the installer to shim the frame into place. When mounted, with the door open, you will need a minimum of ¹⁄4-¹⁄2" of clearance from the bottom of the door, to the floor to determine if you need to create more of a threshold.

Needed after purchase: For standard size vault doors, purchase 10 anchors that are ¹⁄2" to ⁵⁄8" in diameter and 3-4" in length. Custom sized vaults will have a different amount depending on the size purchased.

General Mounting Information: The door is hung like a pre-hung door, with the exception that it's heavy and will shift around as easy. Read the entire instructions before beginning. Being cautious and using good judgment. These instruction are an outline and installation of the vaults are recommended to be done by a professional. We will not be liable for death, injury, or damage to property.

Place the vault door into position. Be sure to have it laid down on some type of support so the dial and handle does not get damaged. Position it in the doorway the way you want it. Lift, open and stabilize the door. You will likely need a pry bar or 2x4 to pry the door up (and out) to a 90 degree angle. As the door swings open, lift and pull the door at the same time, stabilizing the frame. Once open, the door will need support on the outside corner, to help hold it up and to move frame back into the marked position. Place an anchor stud ONLY in the frames anchor holes near the top and bottom hinge. Now that the frame is secure on one side, there should be a gap on the other side. If the door doesn't match up, hammer the frame in or out, and then wedge it (with wedging blocks) into marked position. Open and close the door, and check the attitude of the door compared to it's steel frame. Carefully close the door. Once closed, determine which direction you should shim the frame (between cement and frame). If the door is fitting well into the frame, both center locking lugs should engage and disengage with perhaps a little bit of clearance. If these conditions are good, skip to the last instructions.

You should be reading this section because the frame may require adjustments with shims. Where you insert the shims will depend on what part of the frame is sticking out. For example, when you shut the door, and the door hits on the top first, and doesn't quite close on the bottom, you would loosen up the top anchor, and slide a 1/8" (or thicker/thinner) shim in between the frame and the wall, and place the shim about an inch away from the upper anchor bolt. Tighten the anchor back up and make sure the frame is fitting good. This may require more tapping with a big hammer and wedging into position. If you have an out-swing vault door, adjust the gap in between the frame and door, by removing the square tubing that is located about 4ft up, and in the way of the walk through area. If the door is rubbing on the bottom, loosen the bottom stud, and place a shim all the way across, just below the stud. When you tighten it up, it will drive the frame upward on the open side.

Now that the frame is fitting, fill the gap between the frame and cement wall, which should be about ⁵⁄8" to ³⁄4" with high PSI mortar. Let it cure, then remove the wedges, and fill in the wedge gaps with mortar. Test to see if the door open and closes properly. Finish installing the rest of the anchor studs at this point.

Locks

INCLUDED
		S&G 6741 Black Dial & Chrome w/ Locking Day Key Three combination wheels for 1,000,000 possible combinations Integral relock trigger thwarts punch attacks Brass four-way drive cam allows mounting RH, LH, VU, or VD Metal wheels for long, dependable life Die cast lever Can be used with a variety of attractive dial and rings in several finishes Uses S&G's Magic Module® footprint to match the mounting dimensions of most mechanical and electronic safe locks Variety of dials and rings in Spy-Proof¨ and front reading designs
OPTIONAL
		S&G 6741 Black Dial & Gold Ring w/ Locking Day Key Three combination wheels for 1,000,000 possible combinations Integral relock trigger thwarts punch attacks Brass four-way drive cam allows mounting RH, LH, VU, or VD Metal wheels for long, dependable life Die cast lever Can be used with a variety of attractive dial and rings in several finishes Uses S&G's Magic Module® footprint to match the mounting dimensions of most mechanical and electronic safe locks Variety of dials and rings in Spy-Proof¨ and front reading designs
		Securam SafeLogic Chrome Backlit Keypad Unprecedented commitment to quality and reliability 2 Codes: Manager Code and User Code 9 Volt Battery powers the system 10,000+ openings on a 9 Volt battery 5 minute Penalty LockOut upon entry of 4 incorrect codes Reset button to set the lock back to factory default Standard footprint and mounting pattern, easy retrofit for any mechanical or electronic safe lock​ SureLock Battery Compartment for easy Battery replacement, without removing the entrypad from the safe door Can be paired with any other SECURAM motorized safe lock bodies
		Securam SafeLogic Gold Backlit Keypad Unprecedented commitment to quality and reliability 2 Codes: Manager Code and User Code 9 Volt Battery powers the system 10,000+ openings on a 9 Volt battery 5 minute Penalty LockOut upon entry of 4 incorrect codes Reset button to set the lock back to factory default Standard footprint and mounting pattern, easy retrofit for any mechanical or electronic safe lock​ SureLock Battery Compartment for easy Battery replacement, without removing the entrypad from the safe door Can be paired with any other SECURAM motorized safe lock bodies
		SecuRam EMP-Proof Chrome Keypad & Dial (2) User Codes (1) 3 wheel mechanical combination True EMP-Proof safe lock system BackLit electronic entrypad - lights up in the dark LED light to illuminate the dialing index Set mechanical combination using the provided change key. Powered by (1) 9Volt battery Stainless Steel Locking SwingBolt Available in SwingBolt, DeadBolt or SpringBolt lock body options Price: $449
		SecuRam EMP-Proof Gold Keypad & Dial (2) User Codes (1) 3 wheel mechanical combination True EMP-Proof safe lock system BackLit electronic entrypad - lights up in the dark LED light to illuminate the dialing index Set mechanical combination using the provided change key. Powered by (1) 9Volt battery Stainless Steel Locking SwingBolt Available in SwingBolt, DeadBolt or SpringBolt lock body options Price: $449

Weights with standard ¹⁄4" Door:

Weights with standard ³⁄8" Door:

Weights with standard ¹⁄2" Door:

***Custom features such as larger frame will also increase the weight.***

Specifications