Safes with this Lock:
This lock is an option on most Mesa Safe models.
1. Turn dial to the LEFT [counter-clockwise]
1st number to pass arrow 3 times and stop on the 4th time
2. Turn dial RIGHT [clockwise]
2nd number to pass arrow 2 times and stop on the 3rd time.
3. Turn dial to LEFT [counter-clockwise]
3rd number to pass arrow 1 time and stop on the 2nd time.
If locking bolt does not retract after you have dialed the combination to open. It is possible the lock was jarred during shipment. Repeat opening procedure using one number lower than each number of your combination. Also try one number higher that each number. Example: 20-60-40, dial 19-59-39 and 21-61-41. If either sequence of numbers operates your lock, change your instruction sheet accordingly.
Operate the combination lock immediately several times with the door open to become familiar with it. Don't spin the dial under any circumstances. Always rotate the dial slowly, and make certain you stop the dial exactly on the number called for by the combination. If you pass a number mark, start over from the beginning. Never use force on the lock. Your combination lock has been carefully tested and inspected. Combination operating problems are rare. If your Mesa Safe opens after difficulty in operating the lock, DO NOT RELOCK THE SAFE. Please contact our Support Team for assistance in correcting the problem.
After warranty, we recommend the lock be serviced by a qualified locksmith every two years.
Locking Your Safe:
To lock, turn dial to the Left at least 4 revolutions. Always make sure your safe is locked & secured.